Difference between revisions of "ONSemi RSL10 SiP"
(→Example Application) |
|||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
Latest revision as of 15:17, 8 May 2024
This article describes specifics for the ON Semiconductor RSL10 SiP evaluation board.
Minimum requirements
- J-Link software V6.90 or later
Preparing for J-Link
This step is very easy as the RSL10 SiP features a J-Link OB (on-board debugger) which works out-of-the-box.
- Connect the board via USB to the PC (USB is also used as power supply)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ON Semiconductor RSL10 SiP EVB V1.2. It is a simple Hello World sample linked into the internal flash.
SETUP:
- J-Link software: V6.90
- Embedded Studio: V5.10b
- Hardware: ON Semiconductor RSL10 SiP EVB V1.2
- Link: File:ONSemi RSL10 TestProject ES V510b.zip