Difference between revisions of "Ozone dual core debugging example based on NXP LPC4350"
(Created page with "__TOC__ This article describes how to setup dual core debugging with Ozone the J-Link debugger. == Required soft- and hardware == The sample project has been tested with th...") |
(Changed redirect target from SEGGER Ozone to Dual Core Debugging with Ozone) (Tag: Redirect target changed) |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
+ | #REDIRECT [[Dual_Core_Debugging_with_Ozone]] |
||
− | __TOC__ |
||
− | |||
− | This article describes how to setup dual core debugging with Ozone the J-Link debugger. |
||
− | |||
− | == Required soft- and hardware == |
||
− | |||
− | The sample project has been tested with the following components: |
||
− | |||
− | *J-Link |
||
− | *Arrow LPC-4350-DB1 Rev.B evaluation board |
||
− | *J-Link software version V6.32g or later |
||
− | *SEGGER Embedded Studio V3.40 |
||
− | *Ozone V2.56s |
||
− | |||
− | == Running the sample project == |
||
− | |||
− | The Cortex-M4 simply sends a defined command to the Cortex-M0 using shared memory and waits for the response before it resumes execution. The Cortex-M0 waits for command reception from the Cortex-M4 and simply sends back a "received-response" using shared memory. |
||
− | |||
− | To run the sample project at first open the project Ozone_Multicore_LPC4350_CM4.jdebug with Ozone and start a debug session. Then open a second instance of Ozone with the project Ozone_Multicore_LPC4350_CM0.jdebug and start the debug session. |
||
− | Now you can independently run, halt and step both cores. Please note that starting the Cortex-M4 will issue a system reset and affect both cores, so the Cortex-M4 always has to be started before the Cortex-M0. |
||
− | |||
− | == Included files == |
||
− | {| class="wikitable" |
||
− | |- |
||
− | ! Filename !! Content |
||
− | |- |
||
− | | '''Readme.txt''' || Readme file with instructions for debugging |
||
− | |- |
||
− | | '''LPC4350_CortexM0_SES\LPC4350_CortexM0_SES.emProject''' || Cortex M0 core project file |
||
− | |- |
||
− | | '''LPC4350_CortexM4_SES\Src\*''' || Cortex M4 core project source files |
||
− | |- |
||
− | | '''LPC4350_CortexM4_SES\LPC4350_CortexM4_SES.emProject''' || Cortex M4 core project file |
||
− | |- |
||
− | | '''LPC4350_CortexM4_SES\Src\*''' || Cortex M4 core project source files |
||
− | |} |
||
− | |||
− | == NXP LPC4350 Embedded Studio Projects == |
||
− | [[Media:LPC4350_DualCore_Debug_ES340_Ozone.zip | LPC4350_DualCore_Debug_ES340_Ozone.zip]] |
Latest revision as of 11:50, 20 May 2020
Redirect to: