Renesas FPB-R9A02G021
Revision as of 17:49, 18 March 2024 by Torben.scharping (talk | contribs) (Created page with "__TOC__ This article describes specifics for the Renesas FPB-R9A02G021 evaluation board.<br> '''[PICTURE OF BOARD]''' 450px == Preparing for J-...")
This article describes specifics for the Renesas FPB-R9A02G021 evaluation board.
[PICTURE OF BOARD]
450px
Preparing for J-Link
- Connect the J-Link to J15.
- Power the board via J17.
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the [SiliconVendor] [EvalBoardName].
It is a simple Hello World sample linked into the internal flash.
SETUP
- Embedded Studio: V7.20
- Hardware: [SiliconVendor] [EvalBoardName]
- Link: File:VENDOR DEVICENAME TestProject ES V720.zip