Difference between revisions of "Renesas RA4M3"
(Created page with "__TOC__ == Minimum requirements == The Renesas RA4M3 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW suppo...") |
m (Erik moved page RA4M3 to Renesas RA4M3) |
(No difference)
| |
Revision as of 10:06, 15 February 2022
Contents
Minimum requirements
The Renesas RA4M3 series devices requires special handling for the TrustZone partition registers of the MCU. This requires certain HW support which is not provided by older J-Link models. The following table lists the minimum J-Link HW version needed to support this MCU.
- J-Link-OB-S124
- J-Link BASE V10
- J-Link PLUS V10
- J-Link ULTRA+ V4
- J-Link PRO V4
- J-Link WiFi V1
- J-Trace PRO V2 Cortex-M
- J-Trace PRO V2 Cortex
Later versions (e.g. V10 is listed and current HW is V11) will also work.
Note: Models which are not listed here do not support this MCU.
