Difference between revisions of "Renesas RZ/A3UL SMARC EVK"
(Created page with "__TOC__ This article describes specifics for the Renesas RZ/A3UL SMARC evaluation board. The board supports different boot / power modes. File:Renesas_RZ/A3UL_SMARC_EVK.jp...") |
(→Example Project) |
||
Line 17: | Line 17: | ||
== Example Project== |
== Example Project== |
||
− | * |
+ | *N/A |
Revision as of 16:32, 9 August 2022
This article describes specifics for the Renesas RZ/A3UL SMARC evaluation board. The board supports different boot / power modes.
Minimum requirements
- J-Link software V7.70a or later
Preparing for J-Link
- Connect the J-Link to the SWD header (CN2)
- Power the board via USB-C (5V / 3A)
- Press the POWER button for a few seconds until the Carrier PWR On led turns on
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
- N/A