Difference between revisions of "Renesas RZ/G2L"
(→Evaluation Boards) |
(→Evaluation Boards) |
||
Line 9: | Line 9: | ||
==Evaluation Boards== |
==Evaluation Boards== |
||
− | *Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/ |
+ | *Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/Renesas_RZ/G2L_SMARC_EVK |
==Example Application== |
==Example Application== |
Revision as of 12:16, 7 June 2021
The Renesas RZ/G2L microcontroller features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
Cores
Cortex-M33
By default, the Cortex-M33 is not enabled / held in reset. The J-Link software executes a device specific initialization sequence which enables the Cortex-M33 thus debugging via Cortex-M33 works out-of-the-box.
Cortex-A55
Not supported yet.
Evaluation Boards
- Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/Renesas_RZ/G2L_SMARC_EVK
Example Application
- Renesas RZ/G2L SMARC EVK: https://wiki.segger.com/NXP_RZG2L_SMARC_EVK#Example_Project