SPC560D-Discovery Evalboard

From SEGGER Wiki
Revision as of 11:29, 7 June 2016 by Erik (talk | contribs) (Created page with "The ST SPC560D-Discovery evaluation board needs to be setup to allow to connect an external J-Link to the MCU as by default, the on board debugger drives the debug pins. To is...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The ST SPC560D-Discovery evaluation board needs to be setup to allow to connect an external J-Link to the MCU as by default, the on board debugger drives the debug pins. To isolate the on board debugger, in order to make sure that it does not interact with the J-Link, the following solder bridges needs to be removed:

  • J101
  • J103
  • J105
  • J109
  • J111
  • J110
  • J114

wiki-board-ST-SPC560D-DIS.png

Retrieved from "https://wiki.segger.com/index.php?title=SPC560D-Discovery_Evalboard&oldid=434"