Difference between revisions of "SemiDrive E33xx"
Arne.kulinna (talk | contribs) (Created page with "__TOC__ The SemiDrive E33xx are Cortex-R5 based MCUs.") |
Arne.kulinna (talk | contribs) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__TOC__ |
__TOC__ |
||
The SemiDrive E33xx are Cortex-R5 based MCUs. |
The SemiDrive E33xx are Cortex-R5 based MCUs. |
||
+ | |||
+ | ==Internal Flash== |
||
+ | |||
+ | E32xx devices have no internal flash. |
||
+ | |||
+ | ==QSPI Flash== |
||
+ | |||
+ | E33xx devices consist of a SIP and have an internal QSPI flash. |
||
+ | |||
+ | QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the [[QSPI Flash Programming Support | QSPI Flash Programming Support article]].<br> |
||
+ | J-Link supports multiple pin configurations for [DEVICE]. The default loader is marked in '''bold'''. |
||
+ | {| class="seggertable" |
||
+ | |- |
||
+ | ! Device !! Base address !! Maximum size !! Supported pin configuration |
||
+ | |- |
||
+ | | QSPI flash || 0x10000000 || 128 MB || *'''Default''' CS@X2 SCLK@X1 D0@X3 D1@X4 D2@X5 D3@X6 |
||
+ | |} |
||
+ | |||
+ | ==ECC RAM== |
||
+ | E33xx devices have ECC RAM which can be disabled. |
||
+ | However, a connect to E33xx devices will initialize 1MB at 0x400000. |
||
+ | |||
+ | ==Reset== |
||
+ | No device specific reset is necessary. The normal Cortex-R reset is performed. |
||
+ | |||
+ | See here for more information: https://wiki.segger.com/J-Link_Reset_Strategies#Strategies_for_ARMv8-AR_devices |
Revision as of 13:54, 24 May 2023
Contents
The SemiDrive E33xx are Cortex-R5 based MCUs.
Internal Flash
E32xx devices have no internal flash.
QSPI Flash
E33xx devices consist of a SIP and have an internal QSPI flash.
QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the QSPI Flash Programming Support article.
J-Link supports multiple pin configurations for [DEVICE]. The default loader is marked in bold.
Device | Base address | Maximum size | Supported pin configuration |
---|---|---|---|
QSPI flash | 0x10000000 | 128 MB | *Default CS@X2 SCLK@X1 D0@X3 D1@X4 D2@X5 D3@X6 |
ECC RAM
E33xx devices have ECC RAM which can be disabled. However, a connect to E33xx devices will initialize 1MB at 0x400000.
Reset
No device specific reset is necessary. The normal Cortex-R reset is performed.
See here for more information: https://wiki.segger.com/J-Link_Reset_Strategies#Strategies_for_ARMv8-AR_devices