View source for SemiDrive SD126 E3205 LQFP144 DEV KIT

__TOC__

This article describes specifics for the SemiDrive SD126_E3205_LQFP144_DEV_KIT. It can be used to test & verify E32xx device support.

<!--[[File:SemiDrive_SD126_E3205_LQFP144_DEV_KIT.jpg|450px]]-->

== Minimum requirements ==
* J-Link software V7.88d or later

== Preparing for J-Link ==
*Connect the J-Link to the JTAG header (J301)
*Power the board via external power supply with 5V (J801)
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:

[[File:SemiDrive_SD126_E3205_LQFP144_DEV_KIT_Connect.jpg|400px]]