Difference between revisions of "Silicon Labs EFR32xG25"
(→Device Specific Handling) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 21: | Line 21: | ||
*The device has 2 Watchdogs, they are feed during programming, if they are enabled. |
*The device has 2 Watchdogs, they are feed during programming, if they are enabled. |
||
| − | ==Device Specific Handling== |
+ | == Device Specific Handling == |
===Reset=== |
===Reset=== |
||
*The devices uses normal Cortex-M reset, no special handling necessary, like described [[J-Link_Reset_Strategies#Type_0:_Normal | here]]. |
*The devices uses normal Cortex-M reset, no special handling necessary, like described [[J-Link_Reset_Strategies#Type_0:_Normal | here]]. |
||
| + | |||
| + | === Security === |
||
| + | See: [[Silicon Labs EFx32 Series 2#Debug lock | Silicon Labs EFx32 Series 2]] article. |
||
| + | |||
| + | === Secure boot === |
||
| + | See: [[Silicon Labs EFx32 Series 2#Secure boot specific | Silicon Labs EFx32 Series 2]] article. |
||
==Evaluation Boards== |
==Evaluation Boards== |
||
| + | *[[Silicon Labs BRD4271A]] |
||
| − | *Silicon Labs ERF32xG25 evaluation board: https://wiki.segger.com/Silicon_Labs_BRD4271A |
||
==Example Application== |
==Example Application== |
||
| + | *[[Silicon Labs BRD4271A#Example_Project | Silicon Labs BRD4271A]] |
||
| − | *Silicon Labs ERF32xG25 evaluation board: https://wiki.segger.com/Silicon_Labs_BRD4271A#Example_Project |
||
Revision as of 16:33, 10 October 2023
The Silicon Labs EFR32xG25 are wireless SoCs based on Cortex-M33 microcontrollers. These MCUs are part of the EFx32 Series 2 devices.
Contents
EFx32 Series 2 specifics
Please refer to the Silicon Labs EFx32 Series 2 article.
Flash Banks
Internal Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Internal flash | 0x08000000 | Up to 1920 KB | 
|
| User Data | 0x0FE00000 | 1 KB |
|
Watchdog Handling
- The device has 2 Watchdogs, they are feed during programming, if they are enabled.
Device Specific Handling
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Security
See: Silicon Labs EFx32 Series 2 article.
Secure boot
See: Silicon Labs EFx32 Series 2 article.
