Difference between revisions of "SparkFun Thing Plus RP2040"
(Created page with " thumb | right | 300 px | SparkFun Thing Plus RP2040 (RP2040) The SparkFun Thing Plus RP2040 is a Raspberry Pi RP2040 evaluation b...") |
(→Samples) |
||
(One intermediate revision by the same user not shown) | |||
Line 22: | Line 22: | ||
* [https://www.segger.com/products/development-tools/embedded-studio/ SEGGER Embedded Studio] V5.42a or later |
* [https://www.segger.com/products/development-tools/embedded-studio/ SEGGER Embedded Studio] V5.42a or later |
||
− | === |
+ | === QSPI Projects === |
* [[Media:sparkfun_ThingPlus_RP2040_blinky.zip | QSPI blinky]] |
* [[Media:sparkfun_ThingPlus_RP2040_blinky.zip | QSPI blinky]] |
Latest revision as of 16:53, 23 April 2021
The SparkFun Thing Plus RP2040 is a Raspberry Pi RP2040 evaluation board.
Features (selection)
- RP2040 MCU
- 16MB on board QSPI flash
- USB-C
- On board LED
- 18 I/O pins
- Cortex-M 9-Pin external debug connector
For further information please refer to the SparkFun Thing Plus RP2040 web page.
Setting up with J-Link
The SparkFun Thing Plus RP2040 comes with a Cortex-M 9-pin debug header
Note: For a all J-Link models, the SEGGER Cortex-M 9-Pin Adapter can be used for the SparkFun Thing Plus RP2040 (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug interface itself).
Example Projects
To run the following example projects the following prerequisites need to be met:
- J-Link software V7.00b or later
- J-Link HW revision 11 or later (J-Link EDU Mini and J-Trace Pro V1 or later also supported)
- SEGGER Embedded Studio V5.42a or later