Difference between revisions of "TI AM335x"
(→RTT) |
(→RTT) |
||
| Line 5: | Line 5: | ||
* When using RTT control block auto-detection, J-Link searches in the internal SRAM @ 0x40300000 - 0x4030FFFF (64 KB) for an RTT control block |
* When using RTT control block auto-detection, J-Link searches in the internal SRAM @ 0x40300000 - 0x4030FFFF (64 KB) for an RTT control block |
||
* The internal SRAM located at 0x402F0400 cannot be used for RTT as it is not accessible by the AHB-AP via which RTT accesses are performed. |
* The internal SRAM located at 0x402F0400 cannot be used for RTT as it is not accessible by the AHB-AP via which RTT accesses are performed. |
||
| − | * As the TI AM335x series implements cache, please refer to the [[RTT#RTT_on_Cortex-A_targets| RTT wiki article]] |
+ | * As the TI AM335x series implements cache, please refer to the RTT wiki article for further instructions / information: [[RTT#RTT_on_Cortex-A_targets| RTT wiki article]] |
Revision as of 12:37, 10 March 2021
Contents
RTT
- Since V6.98b of the J-Link software, RTT can be used out-of-the-box.
- When using RTT control block auto-detection, J-Link searches in the internal SRAM @ 0x40300000 - 0x4030FFFF (64 KB) for an RTT control block
- The internal SRAM located at 0x402F0400 cannot be used for RTT as it is not accessible by the AHB-AP via which RTT accesses are performed.
- As the TI AM335x series implements cache, please refer to the RTT wiki article for further instructions / information: RTT wiki article
