TI CC2340

The TI CC2340 devices are Cortex-M0 based wireless MCUs.

Flash Banks

Internal Flash

Flash Bank	Base address	Size	J-Link Support
Program Flash	0x00000000	512 KB
CCFG Flash	0x4E020000	2 KB

CCFG Flash

• Describe CCFG Flash restriction here.

!!!TBD!!!

Device Specific Handling

Reset

The device uses custom reset which performs a reset via the SACI interface:

• In case of a valid application is programmed, the MCU will be halted on the reset vector (application entry point).
• In case of no valid application is programmed, the MCU will be halted in a so called debug loop

Limitations

Flasher Stand-Alone Mode

Not supported yet. Support will be implemented soon.

Attach

Attach is not supported because a device specific initialization sequence is required.

Evaluation Boards

• TI LP-EM-CC2340R5 evaluation board: http://wiki.segger.com/TI_LP-EM-CC2340R5

Example Application

• TI LP-EM-CC2340R5 evaluation board: http://wiki.segger.com/TI_LP-EM-CC2340R5#Example_Project