View source for TI LP-CC1311P3

[[Category:Evalboards]]
__TOC__

This article describes specifics for the TI Launchpad CC1311P3 evaluation board.<br>

[[File:TI_LP-C1311P3_CC1311P3_board.jpg|450px]]

== Preparing for J-Link ==
*Connect the J-Link to Target In
*Unpopulate the jumpers for used debug lines: RST/TMS/TCK/TDO/TDI/SWO
*Power the board via USB
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
[[File:TI_LP-CC1311P3_CC1311P3_connect.png|400px]]

== Example Project==
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the TI Launchpad CC1311P3.<br>It is a simple Hello World sample linked into the internal flash.<br>
====SETUP====
*J-Link software: V7.88g
*Embedded Studio: V6.34
*Hardware: TI Launchpad CC1311P3
*Link: [[File:TI_LP-C1311P3_CC1311P3_TestProject_ES_V634.zip]]