nRF9131-EK

From SEGGER Wiki
Revision as of 12:28, 7 November 2023 by Artjom.Kister (talk | contribs) (Created page with "__TOC__ This article describes specifics for the Nordic Semiconductor nRF9131-EK evaluation board.<br> 450px == Minimum requirements == * J-Link soft...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Nordic Semiconductor nRF9131-EK evaluation board.
nRF9131-EK.jpg

Minimum requirements

  • J-Link software V7.92m or later

Preparing for J-Link

  • Power the board USB Type-C Connector
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

nrf9161-connect.png

Retrieved from "https://wiki.segger.com/index.php?title=nRF9131-EK&oldid=16946"