Tracing on ST STM32F779
This article describes how to get started with trace on the ST STM32F779 MCU. This article assumes that there is already a basic knowledge about trace in general (what is trace, what different implementations of trace are there, etc.). If this is not the case, we recommend to read Trace chapter in the J-Link User Manual (UM08001). The ST STM32F779 MCU implements tracing via pins, so a J-Trace can be used for tracing.
Sample project
The STM32F779 MCU is in regards of tracing comparable to the STM32F769 so the following example projects can be used as reference: https://wiki.segger.com/Tracing_on_ST_STM32F769
Make sure to set the correct device in your Ozone project.