ONSemi RSL10
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption.
On-Chip Memory Regions
The internal flash is divided into 5 different regions:
Instance Name | Size (bytes) | Memory region |
---|---|---|
Main Flash | 393216 | 0x00100000 - 0x0015FFFF |
Non-Volatile Record (NVR) 1 | 2048 | 0x00080000 - 0x000807FF |
Non-Volatile Record (NVR) 2 | 2048 | 0x00080800 - 0x00080FFF |
Non-Volatile Record (NVR) 3 | 2048 | 0x00081000 - 0x000807FF |
Non-Volatile Record (NVR) 4 (Manufacturing Test) |
1024 | 0x00081800 - 0x00080BFF |
NOTE: For now, the Main Flash Block is supported, only.
Reset
It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which includes a reset via reset pin.
Evaluation Boards
- ON Semiconductor RSL10 SiP evaluation board: https://wiki.segger.com/ONSemi_RSL10_SiP
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ON Semiconductor RSL10 SiP EVB V1.2. It is a simple Hello World sample linked into the internal flash.
SETUP:
- J-Link software: V6.89c
- Embedded Studio: V5.10b
- Hardware: ON Semiconductor RSL10 SiP EVB V1.2
- Link: File:ONSemi RSL10 TestProject ES V510b.zip