Difference between revisions of "AutoChips AC7801x"
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Device families]] |
||
__TOC__ |
__TOC__ |
||
The AutoChips AC7801x series are microcontrollers based on Cortex-M0+. |
The AutoChips AC7801x series are microcontrollers based on Cortex-M0+. |
||
| Line 7: | Line 8: | ||
*Application space (0x080000000 up to 0x08020000) |
*Application space (0x080000000 up to 0x08020000) |
||
*Option bytes (0x08040000 to 0x0804002F) |
*Option bytes (0x08040000 to 0x0804002F) |
||
| + | ** Removing the read-protection (RDP) is supported by the J-Link ('''Note:''' Removing the RDP will trigger a mass-erase of the complete application flash) |
||
| + | ====Option bytes==== |
||
| + | Programming the option bytes is supported by the J-Link. |
||
| + | Setting different protection levels (read-protection or write-protection) can be achieved with one of the following procedures: |
||
| + | # Program the option bytes as a part of the data/application file (Sample HEX file - RDP is set: [[File:AutoChips_ATC0113_EVK_Application_Option_Byte_Sample.hex]]) |
||
| + | # Program the option bytes manually through the ''Exit steps'' of J-Flash: [[UM08003_JFlash#Exit_steps | UM08003 J-Flash Exit steps]] |
||
==Evaluation Boards== |
==Evaluation Boards== |
||
*AutoChips ATC0113 evaluation board: https://wiki.segger.com/AutoChips_ATC0113 |
*AutoChips ATC0113 evaluation board: https://wiki.segger.com/AutoChips_ATC0113 |
||
Latest revision as of 14:29, 10 May 2024
The AutoChips AC7801x series are microcontrollers based on Cortex-M0+.
Internal Flash
The internal flash can have a maximum size of 128KB.
Supported Regions
The internal flash is divided into 2 different regions:
- Application space (0x080000000 up to 0x08020000)
- Option bytes (0x08040000 to 0x0804002F)
- Removing the read-protection (RDP) is supported by the J-Link (Note: Removing the RDP will trigger a mass-erase of the complete application flash)
Option bytes
Programming the option bytes is supported by the J-Link. Setting different protection levels (read-protection or write-protection) can be achieved with one of the following procedures:
- Program the option bytes as a part of the data/application file (Sample HEX file - RDP is set: File:AutoChips ATC0113 EVK Application Option Byte Sample.hex)
- Program the option bytes manually through the Exit steps of J-Flash: UM08003 J-Flash Exit steps
Evaluation Boards
- AutoChips ATC0113 evaluation board: https://wiki.segger.com/AutoChips_ATC0113
