MindMotion MM32F0
Revision as of 12:10, 28 November 2022 by Torben.scharping (talk | contribs)
Contents
The Mimdmotion MM32F0 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M0 processor.
Device Family
Device Family | Flash Size | RAM Size |
---|---|---|
MM32F001 | 16Kb | 2Kb |
MM32F002 | 32Kb | 2Kb |
MM32F003 | 16Kb | 2Kb |
MM32F004 | 32Kb | 4Kb |
MM32F013 | 64Kb | 16Kb |
MM32F014 | 64Kb | 8Kb |
MM32F031 | 32Kb | 4Kb |
MM32F027 | up to 128Kb | 16Kb |
Supported Flash Banks
Internal Flash
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F001 | 0x08000000 | 16Kb | Yes |
MM32F002 | 0x08000000 | 32Kb | Yes |
MM32F003 | 0x08000000 | 16Kb | Yes |
MM32F004 | 0x08000000 | 32Kb | Yes |
MM32F013 | 0x08000000 | 64Kb | (Yes)* |
MM32F014 | 0x08000000 | 64Kb | Yes |
MM32F031 | 0x08000000 | 32Kb | Yes |
MM32F027 | 0x08000000 | up to 128Kb | Yes |
- Unlocking of Flash read protection not supported yet.
Option Byte
Device Family | StartAddr | Size | J-Link Support |
---|---|---|---|
MM32F001 | 0x1FFFF800 | 16b | Yes |
MM32F002 | 0x1FFFF800 | 16b | Yes |
MM32F003 | 0x1FFFF800 | 16b | Yes |
MM32F004 | 0x1FFFF800 | 16b | Yes |
MM32F013 | 0x1FFFF800 | 16b | Yes |
MM32F014 | 0x1FFFF800 | 16b | Yes |
MM32F031 | 0x1FFFF800 | 16b | Yes |
MM32F027 | 0x1FFFF800 | 16b | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82d or later
Evaluation Boards
- Mindmotion MM32F0010 MB-032 evaluation board: https://wiki.segger.com/Mindmotion-MB-032
- Mindmotion MM32F0130 MB-025 evaluation board: https://wiki.segger.com/Mindmotion-MB-025
- Mindmotion MM32F0140 MM32_LQFP48 evaluation board: https://wiki.segger.com/Mindmotion-MM32_LQFP48
- Mindmotion MM32F0270 NANO-F0270 evaluation board: https://wiki.segger.com/Mindmotion-NANO-F0270