Difference between revisions of "ONSemi RSL10"
(→On-Chip Memory Regions) |
(Removed "Support by ONSemi only". Per request by On Semi and based on the listing in supported devices.) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption. |
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption. |
||
| + | |||
| + | ==Debug Support== |
||
| + | J-Link supports debugging and programming of the following memory regions. |
||
| + | |||
==On-Chip Memory Regions== |
==On-Chip Memory Regions== |
||
The internal flash is divided into 5 different regions: |
The internal flash is divided into 5 different regions: |
||
| Line 23: | Line 27: | ||
==Reset== |
==Reset== |
||
| − | It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which |
+ | It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which makes sure that CPU is halted right before the target application but after boot ROM. |
==Evaluation Boards== |
==Evaluation Boards== |
||
Latest revision as of 09:00, 9 June 2023
The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption.
Debug Support
J-Link supports debugging and programming of the following memory regions.
On-Chip Memory Regions
The internal flash is divided into 5 different regions:
| Instance Name | Size (bytes) | Memory region |
|---|---|---|
| Main Flash | 393216 | 0x00100000 - 0x0015FFFF |
| Non-Volatile Record (NVR) 1 | 2048 | 0x00080000 - 0x000807FF |
| Non-Volatile Record (NVR) 2 | 2048 | 0x00080800 - 0x00080FFF |
| Non-Volatile Record (NVR) 3 | 2048 | 0x00081000 - 0x000807FF |
| Non-Volatile Record (NVR) 4 (Manufacturing Test) |
1024 | 0x00081800 - 0x00080BFF |
NOTE: J-Link supports the Main Flash as well as NVR1 - NVR3.
Reset
It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which makes sure that CPU is halted right before the target application but after boot ROM.
Evaluation Boards
- ON Semiconductor RSL10 SiP evaluation board: https://wiki.segger.com/ONSemi_RSL10_SiP
Example Application
- ON Semiconductor RSL10 SiP evaluation board: https://wiki.segger.com/ONSemi_RSL10_SiP#Example_Project
