Difference between revisions of "ONSemi RSL10"

From SEGGER Wiki
Jump to: navigation, search
(Added third party note for ONSemi RSL10 device)
(Removed "Support by ONSemi only". Per request by On Semi and based on the listing in supported devices.)
 
Line 4: Line 4:
   
 
==Debug Support==
 
==Debug Support==
  +
J-Link supports debugging and programming of the following memory regions.
The J-Link support for the ONSemi RSL10 device comes without any warranty and support from SEGGER Microcontroller GmbH.
 
 
Support is provided by ON Semiconductor only.
 
For support, please refer to:
 
[https://www.onsemi.com/PowerSolutions/ticrequest.do https://www.onsemi.com/PowerSolutions/ticrequest.do]
 
   
 
==On-Chip Memory Regions==
 
==On-Chip Memory Regions==

Latest revision as of 09:00, 9 June 2023

The RSL10 family from ON Semiconductor is an ultra-low-power SoC designed for use in high−performance applications focused on wearable and medical applications. The SoC features a Cortex-M3 core and supports bluetooth low energy technology and any 2.4 GHz proprietary protocol stacks, without sacrificing power consumption.

Debug Support

J-Link supports debugging and programming of the following memory regions.

On-Chip Memory Regions

The internal flash is divided into 5 different regions:

Instance Name Size (bytes) Memory region
Main Flash 393216 0x00100000 - 0x0015FFFF
Non-Volatile Record (NVR) 1 2048 0x00080000 - 0x000807FF
Non-Volatile Record (NVR) 2 2048 0x00080800 - 0x00080FFF
Non-Volatile Record (NVR) 3 2048 0x00081000 - 0x000807FF
Non-Volatile Record (NVR) 4
(Manufacturing Test)
1024 0x00081800 - 0x00080BFF

NOTE: J-Link supports the Main Flash as well as NVR1 - NVR3.

Reset

It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which makes sure that CPU is halted right before the target application but after boot ROM.

Evaluation Boards

Example Application