SparkFun MicroMod RP2040
Revision as of 16:40, 23 April 2021 by Fabian (talk | contribs) (Created page with " thumb | right | 300 px | SparkFun MicroMod RP2040 with carrier board (RP2040) The SparkFun MicroMod RP2040 is a [[Raspberry Pi RP2040]...")
The SparkFun MicroMod RP2040 is a Raspberry Pi RP2040 evaluation board.
Features (selection)
- RP2040 MCU
- 16MB on board QSPI flash
- USB-C
- On board LED
- 30 I/O pins
- Cortex-M 9-Pin external debug connector
For further information please refer to the SparkFun MicroMod RP2040 web page.
Setting up with J-Link
The SparkFun MicroMod RP2040 can be placed on a SparkFun MicroMod ATP Carrier Board.
This carrier board comes with a Cortex-M 9-pin debug header
Note: For a all J-Link models, the SEGGER Cortex-M 9-Pin Adapter can be used for the SparkFun MicroMod ATP Carrier Board (except for J-Link EDU mini, which comes with a Cortex-M 9-Pin debug inteface itself).
Example Projects
To run the following example projects the following prerequisites need to be met:
- J-Link software V7.00b or later
- J-Link HW revision 11 or later (J-Link Edu Mini and J-Trace Pro V1 or later also supported)
- SEGGER Embedded Studio V5.42a or later