Flasher
The SEGGER Flasher family is a high performance production programmer.
Contents
Models of Flasher
- Flasher ARM:
- Flasher Portable Plus:
- Gang Programmer:
- Flasher 5 PRO (Legacy)
- Flasher 5 (Legacy)
- Flasher STM8 (Legacy)
- Flasher ST7 (Legacy)
- Flasher PPC (Legacy)
General information
SPI support by Flasher models
General Options: Voltage Settings
Target device specifics
Flasher software tools
Flasher standard tools
The standard tools to configure and control the Flasher products.
Flasher supplementary tools
Tools to use in conjunction with Flashers to support some common tasks, not covered by standard tools.
Support
- Batch Composer
- Controlling Flasher via U-Flash and J-Flash CLI
- Differences between Flasher ATE, Flasher Hub and Flasher Hub-12
- Download project to Flasher
- FAQ
- FAQ/reduce write sector size
- Flasher Device Support Kit (Flasher DSK)
- Glossary
- How to command the Flasher
- How to create a project configuration
- How to patch EEPROM data in a PIC device
- How to read data from a device using U-Flash
- How to use WireCheck
- Performance
- Renesas DLM
- Support Checklist