Search results

Jump to: navigation, search

Create the page "Main" on this wiki! See also the search results found.

Page title matches

  • Main Page
    13 KB (1,841 words) - 10:31, 7 May 2024

Page text matches

  • SWO
    ...shed (usually this is the case at the point where you application jumps to main). As mentioned before in most cases this is simply the CPU core clock.
    2 KB (407 words) - 11:01, 23 April 2024
  • RZ/G1
    ...ease the second core from reset from within the application running on the main core. ...he device, the second core cannot be easily enabled independently from the main core, via J-Link.
    3 KB (487 words) - 08:58, 1 July 2016
  • Embedded Studio
    ''Main Article:'' [[Embedded Studio Code Options]] ''Main Article:'' [[Embedded Studio Debug Options]]
    10 KB (1,458 words) - 10:45, 7 May 2024
  • ST STM32L4
    !colspan="3"| Main flash memory
    5 KB (834 words) - 15:10, 8 May 2024
  • TI Code Composer Studio
    ...n project properties by clicking '''Project''' | '''Properties''' from the main menu and go to the '''General''' tab
    6 KB (982 words) - 18:09, 6 December 2023
  • i.MX7Dual
    ##Start J-Link Commander and connect to the A7 main core by selecting "MCIMX7D7_A7_0" as target device
    4 KB (740 words) - 10:14, 17 January 2024
  • TI MSPM0G
    | MAIN || 0x0000_0000 - 0x0020_0000 || {{YES}} || {{YES}}
    3 KB (462 words) - 09:39, 15 April 2024
  • Tracing on Silicon Labs EFM32GG990
    # Press PB1 ("Back") twice to return to the main screen
    4 KB (687 words) - 15:57, 4 August 2023
  • Tracing on Silicon Labs EZR32LG330
    ...has been tested with the minimum requirements mentioned above and a ''WSTK Main Board BRD4001A'' evaluation board with a EZR32LG330 radio board plugged int [[File:WSTK_Main_Board_BRD4001A.jpg|none|thumb|WSTK Main Board BRD4001A]]
    4 KB (612 words) - 15:59, 4 August 2023
  • Tracing on Silicon Labs EZR32WG330
    ...has been tested with the minimum requirements mentioned above and a ''WSTK Main Board BRD4001A'' evaluation board with a EZR32WG330 radio board plugged int [[File:WSTK_Main_Board_BRD4001A.jpg|none|thumb|WSTK Main Board BRD4001A]]
    4 KB (614 words) - 15:59, 4 August 2023
  • AT91SAM7
    break main
    4 KB (530 words) - 14:22, 10 May 2024
  • Keil MDK-ARM
    * Select '''Project | Options for Target ...''' from the main menu *Click '''Project | Options''' for Target from the main menu
    7 KB (1,089 words) - 11:52, 4 November 2022
  • FreeRTOS with SystemView
    # Add "traceSTART();" to main
    5 KB (742 words) - 12:13, 1 March 2024
  • Getting unknown addresses in instruction trace
    ==Main causes== The main causes for this are:
    9 KB (726 words) - 09:37, 27 September 2022
  • Access to illegal addresses causes core to crash
    ...to make a specific IDE using the J-Link script file, please refer to the [[Main Page#IDE_and_Debugger_specifics|IDE section]]
    2 KB (363 words) - 12:51, 23 November 2017
  • RTT
    ...lete but before RTT is used for the first time. A good time to do it is in main(). This makes sure that no cache line contains dirty RTT data / information ...lete but before RTT is used for the first time. A good time to do it is in main(). This makes sure that no cache line contains dirty RTT data / information
    47 KB (7,203 words) - 13:47, 22 April 2024
  • NXP S32M27x
    ===Main core===
    2 KB (325 words) - 15:19, 29 November 2023
  • General information about tracing
    Generally tracing is divided into the following main trace types which are all supported by our [https://www.segger.com/products
    11 KB (1,756 words) - 15:55, 17 March 2023
  • SEGGER Flash Loader
    ...when switching from "Debug" to "Release" build in the template project the main cause is that third party libraries are used.<br>
    24 KB (3,557 words) - 14:59, 20 November 2023
  • nRF52 Series Devices
    * Edit main and set priority of DebugMonitor_IRQn to lowest priority
    11 KB (1,692 words) - 10:30, 16 August 2023
  • PSoC 4xxx series
    Depending on the device family, the 48 MHz IMO (Integrated Main Oscillator) must be activated for some devices. In addition, the required S
    6 KB (741 words) - 18:25, 30 November 2023
  • Atollic TrueSTUDIO
    * Start TrueSTUDIO and click '''File | New | C Project ...''' from the main menu ...nfigure custom settings click '''Run | Debug Configurations...''' from the main menu).
    2 KB (273 words) - 13:42, 8 October 2020
  • ST STM32H7
    !colspan="3"| Main flash memory
    20 KB (3,262 words) - 15:02, 8 May 2024
  • CoreLink SSE-200 Subsystem for MPS3
    |Main core that device boots from by default ...al SRAM and executed by core 1. Sends commands to core 0 that instruct the main application to toggle LED2
    3 KB (435 words) - 09:26, 27 May 2021
  • Use SystemView without RTOS
    * Include SEGGER_SYSVIEW_Conf.h and SEGGER_SYSVIEW.h in your main.c. * Call SEGGER_SYSVIEW_Conf(); in your main() function
    7 KB (1,172 words) - 12:09, 24 April 2024
  • Tracing on Silicon Labs EFR32MG12
    ...has been tested with the minimum requirements mentioned above and a ''WSTK Main Board BRD4001A'' evaluation board with a ''EFR32MG12'' board plugged into i [[File:WSTK_Main_Board_BRD4001A.jpg|none|thumb|WSTK Main Board BRD4001A]]
    3 KB (537 words) - 15:58, 4 August 2023
  • ST STM32L5
    !colspan="4"| Main flash memory
    4 KB (611 words) - 16:33, 29 February 2024
  • Semihosting
    ...commandline parameters for the application to run with (argc and argv for main())
    21 KB (3,137 words) - 09:38, 20 March 2023
  • NXP LPC55xx
    The LPC55S6x devices contain two Cortex-M33 cores, one main and one co-processor. Unlike as for the main Cortex-M33, flash-programming is currently not supported for the second Cor
    3 KB (461 words) - 11:51, 7 March 2023
  • Watchdog
    In a [[Single threaded program]] (one that continuously runs through a main loop), this process is usually easy; the watchdog is typically fed ...readed program, there may be one task taking over the functionality of the main loop , being responsible for feeding the watchdog.
    3 KB (425 words) - 15:54, 5 June 2019
  • Single threaded program
    usually called "the main loop".
    463 bytes (68 words) - 15:55, 5 June 2019
  • Cache
    ...y 32 bytes. Every time a miss occurs, the entire cache line is filled from main memory.
    966 bytes (164 words) - 19:15, 20 December 2019
  • Debug Probes - J-Link & J-Trace
    * [[J-Trace | J-Trace main article]]
    16 KB (1,908 words) - 10:22, 8 May 2024
  • Debug on a Target with Bootloader
    How to debug the bootloader application and main application in the same Ozone setup is explained [https://wiki.segger.com/D ...nd jump to the application space where per default Ozone will then stop at main.
    4 KB (412 words) - 23:50, 26 July 2022
  • emNet
    ...nd [[IPv6]] can be used on top of different [[Data link protocols]]. Their main purpose is to provide easier to read addressing for example by providing an
    3 KB (458 words) - 14:23, 12 June 2019
  • emWin
    ''Main Article:'' [[emWin Examples]] ...end to demonstrate a certain emWin feature. Elaborate graphics are not the main focus of the examples.
    3 KB (411 words) - 12:47, 16 November 2023
  • HOWTO decompress a gzip archive
    * main() int main(int argc, char **argv) {
    8 KB (734 words) - 11:04, 17 May 2023
  • HOWTO decompress an LZ4 archive
    * main() int main(int argc, char **argv) {
    11 KB (1,128 words) - 11:06, 17 May 2023
  • 6502
    The main designer was Chuck Peddle, https://en.wikipedia.org/wiki/Chuck_Peddle
    3 KB (451 words) - 03:30, 31 December 2022
  • ST STM32WB
    ...via the Flash registers as shown in the [[ST_STM32#Option_bytes | ST STM32 main article]].
    12 KB (1,803 words) - 16:03, 22 September 2023
  • Debug Bootloader and Application in same Ozone project
    ...default the function ''OnProjectLoad()'' will be populated and load your main application: ...target to be halted after bootloader execution before branching into your main application.
    2 KB (295 words) - 13:49, 14 May 2021
  • printf
    int main(void) {
    3 KB (442 words) - 09:09, 27 May 2021
  • J-Link Visual Studio Code
    "runToEntryPoint": "main", ...'echo "deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main" > /etc/apt/sources.list.d/vscode.list'
    14 KB (2,036 words) - 12:02, 2 May 2024
  • ST STM32G4
    !colspan="3"| Main flash memory
    6 KB (1,007 words) - 16:01, 4 August 2023
  • ARM
    ...rs to ARM. Most importantly RISC-V, an open CPU core design is emerging as main competitor.
    913 bytes (150 words) - 14:49, 26 July 2019
  • How to create a library project and use it in executable project
    # Use the library functions in your executable main application
    1 KB (219 words) - 15:40, 1 August 2022
  • Embedded Studio Debug Options
    ...rty will have macro expansion applied to it. If it is not defined then the main load file is used. || The name of the main load file. This property will have macro expansion applied to it. If it is
    10 KB (1,529 words) - 11:30, 29 August 2019
  • Embedded Studio Code Options
    | Main Stack Size || The size of the main stack in bytes.
    21 KB (3,083 words) - 17:19, 14 August 2019
  • SEGGER Semihosting
    main()
    5 KB (663 words) - 11:14, 5 September 2019
  • DCC
    The main C file has a section which can be modified. Per default, a 1KB output buffe
    37 KB (3,837 words) - 15:59, 6 September 2019
  • Using embOS with Nordic BLE
    ...lication without embOS, this is usually done within an endless loop in the main() function. With embOS, this can be done from a task or OS_Idle(). If NRF_L
    4 KB (621 words) - 14:38, 18 May 2021
  • nRF91 Series Devices
    ...zone project will set two breakpoints, one after the trace init and one at main. This is needed due to some specifics of this device that are further expla
    5 KB (825 words) - 16:36, 16 August 2023
  • Extending Disassembly with Ozone
    plugin is loaded. The main purpose of function <code>init</code> is to provide a place
    36 KB (3,804 words) - 11:01, 20 October 2023
  • UM08001 J-Link / J-Trace User Guide
    All J-Links feature the main indicator. ==== Main indicator ====
    92 KB (14,353 words) - 12:06, 7 March 2024
  • Using User Build Steps in Embedded Studio
    # Now a file called Test.bin should appear in the main project directory where the .emProject file is located
    1 KB (206 words) - 16:50, 30 August 2023
  • J-Link Virtual COM Port
    The main disadvantage when using this to communicate with the target processor is th
    6 KB (952 words) - 12:46, 22 June 2023
  • Ozone Debug and Trace with RAM Functions
    which is usually done by the startup code before the main application executes. After the RAM functions are initialized, which they usually are at <code>main()</code>,
    3 KB (403 words) - 11:59, 5 June 2020
  • Using embOS with STM32CubeMX
    To use embOS in the project, main.c needs to be modified to include the following: The resulting modifications to main.c should therefore resemble the following example:
    11 KB (1,654 words) - 12:42, 23 February 2024
  • Startup Completion with Ozone
    ...ble below. The default value of the variable is the program's entry point (main) function. | main
    9 KB (1,399 words) - 12:07, 24 February 2020
  • J-Link RTT Viewer
    Extends the window title of the main window to <sTitle>.
    21 KB (2,872 words) - 09:41, 4 March 2024
  • Cortex-M Fault
    * main() void main(void) {
    47 KB (5,096 words) - 16:57, 26 June 2023
  • Analyzing Cortex-M Faults with Ozone
    * Call frames above and including <code>SVC_Handler</code> are on the main stack. * 40 bytes of main stack and 88 bytes of process stack are currently in use.
    9 KB (1,336 words) - 16:11, 22 October 2020
  • SEGGER Simulation Integration Guide
    ...le the graphical user interface. <br />Copy the following code into the “main.c” file: <source lang="C">/********************************************** int main(void) {
    4 KB (602 words) - 11:40, 17 April 2020
  • Using embOS for Cortex-M with a bootloader
    Some steps have to be performed before the main application can be safely accessed __set_MSP(APP_STACK_PTR); // Set main stack pointer to application initial stack value
    4 KB (650 words) - 15:35, 4 November 2021
  • YUV device (Sample)
    // Invalidate main window.
    10 KB (1,030 words) - 11:01, 22 March 2022
  • Silicon Labs EFM32TG11B
    | PLW[N] || Main block page lock || 0 - 0x1E4 || 0x0FE04000 - 0x0FE041E4
    2 KB (352 words) - 13:30, 5 May 2020
  • UM08003 JFlash
    [[File:JFlash_MainWindow.png|thumb|left|J-Flash main window]] The main window of J-Flash contains seven dropdown menus ('''File''', '''Edit''', ''
    72 KB (10,586 words) - 13:00, 25 March 2024
  • J-Mem
    [[File: JMem_MainWindow.PNG | thumb | right | 400px | J-Mem main window]]
    3 KB (562 words) - 16:22, 12 May 2020
  • J-Flash Lite
    It consists of two components: The configuration dialog and the main window. By clicking the O.K. button, the configuration is applied and the actual main window is shown.
    2 KB (283 words) - 16:40, 6 May 2020
  • SWITCH Set focus (sample)
    // Clear background of the main window // Create a main window, this one will hold any other elements on the screen
    79 KB (12,292 words) - 11:15, 27 June 2022
  • J-Link GDB Server
    (gdb) break main Breakpoint 1 at 0x800037a: file Src\main.c, line 38.
    63 KB (8,889 words) - 09:59, 29 November 2023
  • J-Link SWO Viewer
    ...data is received can be chosen by using the port checkboxes 0 to 31 of the main window.
    13 KB (1,666 words) - 15:42, 24 October 2022
  • Tutorial: Adding embOS to a bare metal project
    The task simply executes the code from the main() function. The main() function needs to initialize the RTOS and the hardware. After the task is
    4 KB (702 words) - 10:51, 24 October 2023
  • Integrity checks with Embedded Studio and SEGGER Linker
    === Example Application Source main.c === File : main.c
    7 KB (872 words) - 15:32, 30 June 2021
  • J-Link Configurator
    ...onfigurator_MainWindow.PNG | thumb | right | 600px | J-Link Configurator - Main window]] #Click ''Options'' --> ''System wide settings'' from the main menu
    3 KB (373 words) - 14:06, 22 September 2023
  • J-Flash SPI
    [[File:JFlashSPI_MainWindow.PNG | thumb | right | 600px | J-Flash SPI (GUI) main window]] The main window will appear, which contains a log window at the bottom and the '''Pr
    46 KB (6,804 words) - 10:32, 27 February 2023
  • emWin headless VNC server
    Start two IP tasks, one IP-main task and a receive task. You don't have to bother about its content because
    9 KB (1,201 words) - 10:29, 21 August 2020
  • Migrating projects from Embedded Studio V4 to V5
    ...nstructors for global objects which need to be constructed before reaching main (if any). Make sure this is done after setting up heap.
    4 KB (679 words) - 10:16, 17 March 2023
  • GigaDevice GD32E1
    | Main flash || 0x08000000 || Up to 128 KB || style="text-align:center;"| {{YES}}
    1 KB (158 words) - 15:36, 22 February 2024
  • Static code analysis in Embedded Studio
    int main(void) { .../main.c:62:9: warning: Division by zero
    2 KB (380 words) - 15:37, 5 March 2021
  • GigaDevice GD32E2
    | Main flash || 0x08000000 || Up to 64 KB || style="text-align:center;"| {{YES}}
    1 KB (190 words) - 13:33, 23 February 2024
  • GigaDevice GD32E5
    | Main flash || 0x08000000 || Up to 512 KB || style="text-align:center;"| {{YES}}
    1 KB (158 words) - 11:18, 1 March 2024
  • Atmel Studio
    * Click '''Project | Properties''' from the main menu * Click '''Build | Build Solution''' from the main menu
    1 KB (188 words) - 16:49, 9 October 2020
  • CooCox CoIDE
    * Open project configuration by clicking '''View | Configuration''' from the main menu
    1 KB (219 words) - 16:50, 9 October 2020
  • NXP LPCXpresso
    ...d your executable is selected in the field '''C/C++ Application'''. The '''Main''' Tab should look as follows:
    3 KB (491 words) - 16:34, 18 August 2021
  • Mentor Sourcery CodeBench
    **In the tab '''Main''':
    1 KB (214 words) - 09:53, 9 October 2020
  • Renesas HEW
    *Click '''Debug | Debug Settings''' from the main menu
    1 KB (207 words) - 09:58, 9 October 2020
  • NXP CodeWarrior
    *Switch to the '''Main''' tab and click on the '''Edit...''' button
    1 KB (190 words) - 10:13, 9 October 2020
  • Cosmic ZAP
    *Your Main Window should have changed the ZAP icon now
    2 KB (304 words) - 10:27, 9 October 2020
  • Emprog Thunderbench
    *Click on '''Debugger | Add JTAG probe to project...''' from the main menu
    1 KB (210 words) - 10:32, 9 October 2020
  • TASKING VX-toolset
    *Click '''Debug | Debug configurations ...''' from the main menu
    1 KB (164 words) - 10:58, 9 October 2020
  • IAR EWRX
    *Click '''Project | Options...''' from the main menu
    645 bytes (108 words) - 11:06, 9 October 2020
  • J-Link License Manager
    [[File:JLinkLicenseManager.PNG | thumb | right | 600px | J-Flash SPI (GUI) main window]]
    749 bytes (111 words) - 17:38, 2 December 2020
  • ONSemi RSL10
    | Main Flash || 393216 || 0x00100000 - 0x0015FFFF '''NOTE:''' J-Link supports the Main Flash as well as NVR1 - NVR3.
    1 KB (207 words) - 09:00, 9 June 2023
  • NXP S32K3xx
    ===Main core (Cortex-M7_0) === *If the main core session has not been started / debugging is not enabled yet, the secon
    10 KB (1,543 words) - 11:09, 30 April 2024
  • ST STM32WL
    * The STM32WL5 are dual core devices with a Cortex-M4 as main core and an additional Cortex-M0. *Main memory (0x08000000 - 0x0803FFFF)
    892 bytes (148 words) - 17:44, 21 November 2022
  • SEGGER Linker Script Files
    ...nstructors for global objects which need to be constructed before reaching main (if any). Make sure this is done after setting up heap.
    8 KB (933 words) - 12:21, 21 November 2022
  • How to create a simple FreeRTOS project with Embedded Studio
    ...above. We recommend to place this file into your source folder where your main.c file is. In this case it is folder /source in the project folder. ...r FreeRTOS application code to the main.c You can use the example projects main as reference.
    5 KB (813 words) - 13:57, 28 April 2021
  • Tickless Mode
    int main(void) {
    32 KB (4,978 words) - 15:22, 6 September 2023
  • Migration from FreeRTOS to embOS
    int main(void) { int main(void) {
    15 KB (2,008 words) - 09:25, 21 May 2021
  • Renesas RZ/G2L
    The Renesas RZ/G2L microcontroller features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
    625 bytes (94 words) - 12:17, 7 June 2021
  • Arm Cortex-M interrupts
    ...Cortex-M hardware reads that value and stores it in the stack pointer MSP (main stack pointer).
    4 KB (665 words) - 11:37, 9 June 2021
  • Using embOS in CMSIS-Pack projects
    ...n()'' will be included in the project and it will fail to build until that main() routine is added manually:
    7 KB (1,034 words) - 10:16, 22 August 2023
  • Using I-CUBE-embOS with STM32CubeMX
    ...th ''STM32CubeMX'', for this will result in duplicate implementations of ''main()''. Instead, we will customize a sample application in ''STM32CubeMX'' lat ...ware Packs -> Configuration'' may be used to customize the generation of ''main.c'' (i.e. the sample application) for demonstrating embOS' usage (a real-wo
    11 KB (1,649 words) - 12:54, 23 February 2024
  • UM08028 J-Scope
    [[File:JScope_MainWindow.png|thumb|right|J-Scope main window]] The main window includes the toolbar, grapharea, symbol table and status bar.
    18 KB (2,855 words) - 10:02, 6 February 2024
  • Using embOS with Renesas RA family, Flexible Software Package (FSP) and e2Studio
    ===Add an embOS application and exclude main.c=== Furthermore, make sure there is no other C file containing the main() routine by excluding or deleting the respective file.
    4 KB (652 words) - 09:51, 25 October 2021
  • Using embOS with Microchip's Atmel START and IAR
    ===Add an embOS application and exclude main.c=== ...re there is no other C file containing the main() routine by excluding the main.c file from the project.
    3 KB (503 words) - 11:41, 25 October 2021
  • Renesas RZ/V2L
    ...ged out-of-the-box without the need of having a application running on the main core which enables the Cortex-M33.
    788 bytes (119 words) - 16:47, 4 November 2021
  • ROMTableScan
    ROMTbl[1][0]: Cortex-A53_0 (main core, clocked)
    3 KB (447 words) - 16:33, 22 August 2022
  • Delayed Program Start in Debug
    * J-Link halts the CPU after some code in main() was already executed. This code may have enabled a motor control and inte
    4 KB (637 words) - 18:30, 6 December 2021
  • SignatureServer
    ...up and put it in a safe, and then turn the computer off afterwards, so the main memory contents are destroyed. Leave it off for a few minutes.
    20 KB (3,305 words) - 17:56, 21 January 2022
  • How to debug an Arduino Sketch with Ozone and J-Link
    * Start the debug session with F5. Per default, the debugger will halt at main.
    4 KB (710 words) - 11:24, 23 October 2023
  • Creating a solution with bootloader and application
    * main.c - Simple Systick interrupt sample * Run main application which is a Systick timer sample which ticks every second and pr
    9 KB (1,513 words) - 09:01, 29 April 2024
  • ROM Bootloader
    ...m counter (PC register) to the entry point of the user application (i.e. ''main()'') after downloading and resetting the target.<br> # Set a breakpoint at the first user application instruction (e.g. main())
    7 KB (1,198 words) - 11:08, 12 July 2023
  • WM MOTION - Swipe in window (Sample)
    // Create main window.
    9 KB (938 words) - 15:53, 24 June 2022
  • GigaDevice GD32L23
    | Main flash || 0x08000000 || Up to 256 KB || style="text-align:center;"| {{YES}}
    1 KB (158 words) - 18:02, 27 February 2024
  • Geehy APM32F4xx
    *Main storage area starting at 0x08000000 with up to 1MB For now, the J-Link support the main storage and option byte area.
    2 KB (375 words) - 14:02, 24 March 2023
  • emRun++
    === Empty main === int main(void) {
    3 KB (447 words) - 16:59, 28 July 2022
  • Geehy APM32F0xx
    *Main storage area starting at 0x08000000 with up to 512KB (256KB for APM32A0xx) *Main storage area starting at 0x0 with up to 32KB
    3 KB (524 words) - 10:14, 28 March 2023
  • Geehy APM32F1xx
    *Main storage area starting at 0x08000000 with up to 512KB (128KB on APM32S1xx) For now, the J-Link support the main storage and option byte area.
    2 KB (317 words) - 17:09, 27 March 2023
  • Geehy APM32E1xx
    *Main storage area starting at 0x08000000 with up to 512KB (128KB for APM32A1xx) For now, the J-Link support the main storage and option byte area.
    2 KB (317 words) - 10:52, 28 March 2023
  • Synchronizing multiple instances of embOS on a multi-core processor
    Core 0 should continue execution in main() before core 1, because core 0 has to perform some initialization that is ...attaching the debugger (Target -> Attach Debugger) and set a breakpoint in main().
    11 KB (1,700 words) - 11:00, 3 August 2022
  • GigaDevice GD32C1
    | Main flash || 0x08000000 || 128 KB || style="text-align:center;"| {{YES}}
    1 KB (140 words) - 15:35, 22 February 2024
  • How to create a custom ESPRO BSP
    * [[Media:Custom_embOS_BSP.zip| Example application and main.c for testing purpose]] its main interface.
    15 KB (1,892 words) - 08:51, 22 August 2022
  • Place Functions in RAM before SystemInit with SEGGER Linker
    ...a generic function that is called from the application after booting up to main() you can find how to here: [[Place_Functions_in_RAM_with_SEGGER_Linker]]
    3 KB (383 words) - 12:21, 16 September 2022
  • Adjusting trace timings and general troubleshooting
    * In the webserver main menu click on "Trace timing configuration". ...recommend to start the trace session with your debugger and let it halt at main.
    8 KB (1,367 words) - 11:16, 23 September 2022
  • How to use Linker-generated symbols
    int main(void) {
    1 KB (205 words) - 15:21, 15 February 2024
  • How to call global constructors
    ...nstructors for global objects which need to be constructed before reaching main (if any). Make sure this is done after setting up heap. ...ally a problem when a constructor uses RTOS functions and is called before main().
    2 KB (283 words) - 10:05, 6 October 2022
  • Using embOS API in C++ constructor of global objects
    The runtime initialization code calls the C++ constructors before main(). int main(void) {
    3 KB (482 words) - 14:49, 10 October 2022
  • netX Studio
    * Select '''File > New > netX CDT Project''' from the main menu. Select '''Debug > Debug Settings''' from the main menu. By default, netX Studio CDT uses OpenOCD for debugging. As an alterna
    4 KB (655 words) - 11:44, 18 April 2024
  • Measuring the embOS Context Switch Time with Cortex-M and the DWT Cycle Counter
    * main() int main(void) {
    7 KB (868 words) - 11:20, 28 October 2022
  • GigaDevice GD32A5
    | Main flash Bank 0 || 0x08000000 || Up to 256 KB || style="text-align:center;"| { | Main flash Bank 1 || 0x08040000 || 128 KB || style="text-align:center;"| {{YES}}
    1 KB (190 words) - 16:27, 16 February 2024
  • Migration from a bare metal application to an RTOS application
    main() executes an endless loop which checks for certain timeouts. int main(void) {
    6 KB (874 words) - 09:22, 20 March 2024
  • TI CC1354P10
    The CCFG section is not part of the main flash but has it's own memory section (address 0x50000000). The CCFG sectio
    2 KB (263 words) - 10:02, 3 February 2023
  • TI MSPM0L
    | MAIN || 0x0000_0000 - 0x0010_0000 || {{YES}} || {{YES}}
    3 KB (446 words) - 09:40, 15 April 2024
  • ST STM32G0
    !colspan="3"| Main flash memory
    2 KB (231 words) - 11:00, 11 March 2024
  • ST STM32L0
    !colspan="3"| Main flash memory
    1 KB (182 words) - 11:53, 15 April 2024
  • ST STM32L1
    !colspan="3"| Main flash memory
    1 KB (196 words) - 10:55, 23 November 2022
  • Renesas RZ/G2UL
    The Renesas RZ/G2UL series features a Cortex-A55 (single or dual) as main processors and a Cortex-M33 as co-processor.
    621 bytes (94 words) - 12:59, 19 December 2022
  • Xilinx Zynq-7000
    ...mmed and loaded before starting to trace your application in the Cortex-A9 main core, otherwise trace data might be missing.
    4 KB (567 words) - 10:29, 31 October 2023
  • Multi-Core Debugging
    Latter one is quite simple to handle from J-Link perspective because the main as well as the secondary core handle their dedicated memory regions, only. *Main core session initializes the entire shared memory region
    2 KB (354 words) - 08:54, 17 August 2023
  • Nations N32G03x
    | Main Flash || style="text-align:center;"| 0x08000000 || style="text-align:center
    1 KB (203 words) - 13:09, 15 February 2023
  • Nations N32G4xx
    | Main Flash || style="text-align:center;"| 0x08000000 || style="text-align:center
    1 KB (217 words) - 13:18, 15 February 2023
  • Nations N32WB4xx
    | Main Flash || style="text-align:center;"| 0x08000000 || style="text-align:center
    936 bytes (125 words) - 13:22, 15 February 2023
  • Nations N32L4xx
    | Main Flash || style="text-align:center;"| 0x08000000 || style="text-align:center
    1 KB (148 words) - 13:27, 15 February 2023
  • embOS C++ wrapper
    int main(void) { int main(void) {
    6 KB (918 words) - 17:58, 1 March 2023
  • NXP MCXN10
    | Main flash (NS) || 0x00000000 || Up to 2 MB || style="text-align:center;"| {{YES | Main flash (S) || 0x10000000 || Up to 2 MB || style="text-align:center;"| {{YES}
    3 KB (388 words) - 15:59, 15 December 2023
  • SemiDrive E31xx
    | Main flash || 0x10000000 || Up to 4 MB || style="text-align:center;"| {{YES}}
    865 bytes (129 words) - 13:54, 24 May 2023
  • SemiDrive D32xx
    | Main flash || 0x10000000 || Up to 4 MB || style="text-align:center;"| {{YES}}
    835 bytes (124 words) - 13:21, 30 May 2023
  • Stack Overflow Prevention
    * UsedStack: < 0: Process Stack. >= 0: Main Stack. // Enable interrupt if main stack did not overflow.
    26 KB (3,318 words) - 14:42, 17 August 2023
  • e-peas EDMS105N
    | Main Flash || 0x00000000 || 256 KB || style="text-align:center;"| {{YES}}
    2 KB (255 words) - 07:59, 13 July 2023
  • ST STM32WBA
    ...e programmed via the Flash registers as shown in the [[ST_STM32 | ST STM32 main article]].
    1 KB (166 words) - 11:45, 25 March 2024
  • How to use SystemView Heap Monitoring - Custom Heap
    ...w setup. To gain some more info on this subject, please consult either the main article ([[How to use SystemView Heap_Monitoring]]) or the SystemView docum
    3 KB (384 words) - 15:38, 19 July 2023
  • GigaDevice GD32W515
    | Main flash(NS) || 0x08000000 || Up to 2 MB || style="text-align:center;"| {{YES} | Main flash(S) || 0x0C000000 || Up to 2 MB || style="text-align:center;"| {{YES}}
    1 KB (163 words) - 15:34, 7 May 2024
  • NXP i.MX 8M Plus
    By default only the main A53 core is enable, the other cores can be enabled by the bootloader or ope
    2 KB (293 words) - 10:29, 8 April 2024
  • NXP i.MX 8X
    By default only the main A35 core is enable, the other cores can be enabled by the bootloader or ope
    2 KB (330 words) - 16:08, 5 April 2024
  • NXP i.MX 8XLite
    By default only the main A35 core is enable, the other cores can be enabled by the bootloader or ope
    2 KB (317 words) - 12:13, 5 April 2024
  • Cmsemicon CM32H6157
    | Main flash || 0x00000000 || 128 KB || style="text-align:center;"| {{YES}} {{Note|The option bytes are located in Main flash from 0x000000C0 to 0x000000C4.<br> Please ensure the correct settings
    816 bytes (108 words) - 08:05, 11 March 2024
  • UM08022 Flasher
    The package includes U-Flash and J-Flash, the main tools for flashing targets: The process of writing dirty data in a cache to main memory.
    155 KB (23,284 words) - 08:54, 3 April 2024
  • J-Link memory maps
    ...t debug session start, the IDE may want to update the memory window before main() is reached and before DDR RAM init etc. took place.<br> As at some point (usually before reaching main() as part of the low-level startup code that also initializes the clocks et
    5 KB (861 words) - 14:32, 13 September 2023
  • NXP PN640 Perf Board
    *Power the board via Main USB.
    912 bytes (142 words) - 15:07, 20 September 2023
  • NXP iMXRT1180
    The RT1180 family comes with a Cortex-M33 (main core) and a Cortex-M7 (secondary core). After reset / by default, the Corte ===Main core===
    2 KB (343 words) - 11:52, 6 December 2023
  • Flasher/Differences between Flasher ATE, Flasher Hub and Flasher Hub-12
    | <dl><dt>Main Module (naked PCB)</dt><dd>108 mm x 56 mm x 20 mm<br>delivered with a | 1x Main Module <br/> 1x Programming Module
    4 KB (603 words) - 16:59, 9 November 2023
  • TI Jacinto 7
    ...different processors with different features. From J-Link perspective, the main difference is the number of available cores. In the following, some generic
    5 KB (874 words) - 14:42, 11 January 2024
  • Continuous Integration
    ...changes to a shared repository, and these changes are integrated into the main codebase, usually several times a day.
    5 KB (792 words) - 16:00, 20 October 2023
  • GigaDevice GD32H7
    | Main flash || 0x08000000|| Up to 3840 KB || style="text-align:center;"| {{YES}}
    724 bytes (102 words) - 09:42, 2 November 2023
  • ST STM32U0
    |STM32U0xxx4 || Main Flash || 0x08000000 || 16 KB || style="text-align:center;"| {{YES}} |STM32U0xxx6 || Main Flash || 0x08000000 || 32 KB || style="text-align:center;"| {{YES}}
    2 KB (245 words) - 12:45, 13 May 2024
  • emWin on Arduino
    // put your main code here, to run repeatedly:
    5 KB (750 words) - 08:40, 26 April 2024
  • HowTo Measure CPU Performance
    * main() int main(void) {
    10 KB (1,116 words) - 17:50, 17 November 2023
  • Creating an eMMC image using Storage Image Creator
    The next step is to perform the initialization of the image. The main purpose of this command is to initialize the emFile instance that the Stora
    17 KB (2,874 words) - 11:48, 27 November 2023
  • How to get a free commercial license for Embedded Studio
    ...License_LicenseManager_Activate.PNG|thumb|Embedded Studio License Manager- Main menu|none]]
    6 KB (906 words) - 10:52, 7 May 2024
  • TI MSPM0C
    | MAIN || 0x0000_0000 - 0x0000_4000 || {{YES}} || {{YES}}
    3 KB (404 words) - 09:39, 15 April 2024
  • NXP MCXN11
    | Main flash (NS) || 0x00000000 || Up to 2 MB || style="text-align:center;"| {{YES | Main flash (S) || 0x10000000 || Up to 2 MB || style="text-align:center;"| {{YES}
    876 bytes (115 words) - 13:49, 9 February 2024
  • How to optimize a Firmware for minimal Size
    ...in RAM, initializes a heap, calls static constructors, and finally calls ''main()''. How the initialization code is written or constructed depends on the t
    15 KB (2,188 words) - 16:53, 19 February 2024
  • GigaDevice GD32F4
    | Main flash || 0x08000000 || Up to 3072 KB || style="text-align:center;"| {{YES}}
    2 KB (267 words) - 09:27, 25 April 2024
  • Flasher SECURE/How to configure a TELP for STM32Gxxx with user-defined SECxR values
    A TELP works in 2 main steps. In the first step, the secure bootloader (SBL) is programmed. In the ...to reload the new RDP option byte. The read protection protects the flash main memory, the option bytes, the backup registers (TAMP_BKPxR in the RTC) and
    10 KB (1,652 words) - 17:20, 23 February 2024
  • GigaDevice GD32F3
    | Main flash || 0x08000000 || Up to 256 KB || style="text-align:center;"| {{YES}}
    2 KB (264 words) - 11:32, 27 February 2024
  • GigaDevice GD32F2
    | Main flash || 0x08000000 || Up to 3072 KB || style="text-align:center;"| {{YES}}
    1 KB (148 words) - 17:13, 28 February 2024
  • Renesas RZ/V2H
    *If the main core session has not been started / debugging is not enabled yet, the secon
    4 KB (485 words) - 16:32, 14 March 2024
  • GigaDevice GD32F1
    | Main flash || 0x08000000 || Up to 3072 KB || style="text-align:center;"| {{YES}}
    2 KB (272 words) - 09:35, 29 February 2024
Retrieved from "https://wiki.segger.com/Special:Search"